Best Paint Colors for Rental Properties: A Landlord's Guide

The same empty rental living room twice: a bright white wall on the left and a warm taupe wall on the right

The best paint color for a rental is one light, warm neutral used in every room, such as Agreeable Gray SW 7029, Accessible Beige SW 7036 or Behr Burnished Clay PPU18-09, with a single white for all trim, doors and ceilings. A greige or soft beige with an LRV around 55 to 65 hides scuffs better than white, suits most tenants' furniture, and lets you touch up any wall from one can.

A rental gets painted for different reasons than your own home. You aren't choosing a mood. You're choosing a color that survives moving day, that the next tenant can picture their stuff against, and that you can patch in an hour between leases. Below are the colors that do that job, sorted by where they go, plus the finish and record-keeping habits that save the most time at turnover. Codes, hex values and LRV come from the manufacturers' color data in Muro. LRV is calculated from the hex, not taken from the paint can. A screen is only an approximation, so a sample on the wall has the final say.

Why one color for the whole unit

Every extra color is another can to store, another code to look up, and another chance to grab the wrong one when you're patching a nail hole in a hurry.

One wall color throughout the unit means:

  • you cut in once where rooms meet, with no color line to keep straight at doorways
  • leftover paint from the living room fixes the bedroom
  • any handyman or painting crew gets one instruction for the whole job

If you own several units, using the same color in all of them is the logical next step. Your maintenance person stops guessing.

Light warm neutrals for the whole unit

These sit in the middle of the scale. Small rooms still feel open, and a dragged mattress or a chair back won't leave an obvious mark. All of them lean warm, which works with the oak floors, beige carpet and builder-grade vinyl you find in most rentals.

Brand Color Code Hex LRV
Sherwin-Williams Agreeable Gray SW 7029 #D1CBC1 60.1
Sherwin-Williams Accessible Beige SW 7036 #D1C7B8 57.9
Benjamin Moore Edgecomb Gray HC-173 #D9D3C4 65.3
Benjamin Moore Revere Pewter HC-172 #CBC6B8 56.5
Behr Burnished Clay PPU18-09 #D2CCC5 60.9
Behr Sculptor Clay PPU5-08 #CCC3B6 55.2

Agreeable Gray and Behr Burnished Clay are the most neutral of the group and the easiest to live with if you don't know who moves in next. Accessible Beige and Sculptor Clay are a touch warmer, good with honey oak trim and older tan carpet. Edgecomb Gray is the lightest, so pick it for smaller units. If you want more options in this family, there's a longer list in our greige guide.

Dark units and basement apartments: go lighter

A garden-level unit or an apartment facing a wall across a narrow lot doesn't get enough daylight for a mid greige. It will read gray and flat. Move up to an LRV around 70 to 85, still warm, so the rooms don't look like an office.

Brand Color Code Hex LRV
Benjamin Moore Pale Oak OC-20 #DDD9CE 69.5
Behr Cameo White MQ3-32 #E9E6E1 79.4
Sherwin-Williams Alabaster SW 7008 #EDEAE0 82.2
Behr Bleached Linen PPU5-09 #F3ECE3 84.6

The trade-off is plain: the lighter the wall, the more marks you'll see. In a light unit, plan on a satin or eggshell finish you can wipe, and keep the leftover can handy.

Hallways, stairs and the entry: one step darker

These are the walls that get hit by moving boxes, bike handlebars and wet coats. A slightly deeper version of the main color hides that wear and still looks like it belongs to the rest of the unit. Use it in common hallways of a multi-unit building, too.

Brand Color Code Hex LRV
Sherwin-Williams Balanced Beige SW 7037 #C0B2A2 45.7
Sherwin-Williams Mindful Gray SW 7016 #BCB7AD 47.6
Behr Perfect Taupe PPU18-13 #B5ACA1 41.9

Balanced Beige is the natural partner of Accessible Beige. Mindful Gray goes with Agreeable Gray or Revere Pewter, and Behr Perfect Taupe pairs with Burnished Clay if you're buying Behr.

One white for trim, doors and ceilings

Pick one white and use it everywhere: baseboards, door casings, interior doors, closet doors and ceilings. When a door gets scratched, you don't need to work out which white it was. A clean, slightly soft white looks fresh next to all the neutrals above. For more on trim specifically, see our trim paint color guide.

Brand Color Code Hex LRV
Sherwin-Williams Extra White SW 7006 #EEEFEA 85.9
Sherwin-Williams Pure White SW 7005 #EDECE6 83.7
Benjamin Moore Swiss Coffee OC-45 #EEECE1 83.6
Behr Whisper White HDC-MD-08 #F5F3ED 89.6

Which finish holds up in a rental

Color gets the attention, but the finish decides whether you repaint a whole wall or just dab a spot.

  • Walls: eggshell. It wipes clean better than flat and still touches up reasonably well.
  • Kitchens and bathrooms: satin. It handles steam and scrubbing.
  • Trim and doors: semi-gloss. Fingerprints and scuffs wash off.
  • Ceilings: flat. Nobody touches them, and flat hides roller marks and patches.

Flat walls are the easiest to touch up invisibly, but they don't take much scrubbing. The shinier the paint, the more a touch-up can show as a slightly different patch, especially when the light hits it from the side. Whatever you choose, always touch up with the same product line and sheen you used on the wall. Our paint finish guide goes through each sheen in more detail.

Keep a paint record for every unit

This is the cheapest habit in the whole article. For each unit, write down:

  • brand, product line, color name and code
  • sheen for walls, trim and ceiling
  • the date it was painted and which rooms

Tape a copy inside a kitchen cabinet or the utility closet, keep one in your files, and label the leftover cans with the unit number. A year later, nobody has to scrape a chip off the wall to get it matched.

Older buildings: lead paint rules come first

If the building was built before 1978, painting can fall under the EPA's Lead Renovation, Repair and Painting (RRP) Rule. EPA says that in pre-1978 rentals the landlord or property management company must comply with the rule when work disturbs paint, and that anyone paid to do that work must be certified. The rule's "minor repair" exception covers work that disturbs 6 square feet or less of painted surface per room inside, or 20 square feet or less outside. Sanding and scraping a whole room before repainting goes past that. Check the EPA pages and your state's rules before turnover work in an older building.

What to avoid in a rental

  • Stark, cool white on every wall. It shows every scuff, makes the next repaint a full repaint, and looks cold next to beige carpet.
  • Bold or dark colors. Some tenants love them, many don't, and covering a dark wall at move-out usually takes extra coats and often a primer.
  • A different color in every room. More cans, more mistakes, more cutting in.
  • Flat paint in kitchens and bathrooms. It marks from steam and grease, and scrubbing it takes the paint off with the dirt.
  • Mixing brands for touch-ups. A "matched" color from another brand or store can look slightly off on the same wall.

If you're getting a house ready to sell rather than to rent, the choices overlap but the goal is different. We cover that in paint colors that help sell your home.

How to check a color before you buy

Buy a sample or a peel-and-stick swatch of your top two, put them on the wall that gets the least light, and look at them in the morning and in the evening with the overhead lights on. If the unit has cool-white LED fixtures, expect warm neutrals to look grayer under them.

If you're picking one color for several units, it helps to see it in each of them first. In Muro you take a photo of the room, choose a real paint by name or code, for example Agreeable Gray SW 7029 or Behr Burnished Clay PPU18-09, and see it on those exact walls. The iPhone app also shows the room by day, at sunset and at night. You can start in the browser at app.usemuro.com. Once you've settled on a color, the paint calculator tells you how many gallons a unit needs.

FAQ

What is the best neutral paint color for a rental property?

A light, warm greige or beige with an LRV around 55 to 65. Agreeable Gray SW 7029, Accessible Beige SW 7036 and Behr Burnished Clay PPU18-09 are safe choices because they go with most floors and furniture and hide light scuffs.

Should rental walls be white?

Only in units with very little daylight, and then a warm white like Alabaster SW 7008 or Behr Bleached Linen PPU5-09 in an eggshell finish. Stark white shows marks quickly and usually needs a full repaint at every turnover.

What paint finish is best for rental walls?

Eggshell for living areas and bedrooms, satin for kitchens and bathrooms, semi-gloss for trim and doors, flat for ceilings. Always touch up with the same product line and sheen.

Should every room in a rental be the same color?

Yes, as a rule. One wall color plus one trim white means fewer cans, faster touch-ups and no mistakes at turnover. Use a slightly deeper shade such as Balanced Beige SW 7037 in hallways if they take a beating.

What gray paint is good for rental properties?

A warm gray rather than a cool one. Agreeable Gray SW 7029, Revere Pewter HC-172 and Behr Burnished Clay PPU18-09 read gray-beige and suit wood and beige floors. Cool grays with a blue cast tend to look cold in rentals with warm flooring.

MS

By Mariusz Szyma

Founder of Muro

I build Muro, the app that shows real paint colors on a photo of your own room. Before that I spent twelve years in product management, at startups and at larger companies.

Share this article

Related Articles