Pure White Review (SW 7005): Undertone, LRV, Walls and Trim

The same living room with white-painted trim and a fireplace twice: Pure White walls on the left, deep navy Naval walls on the right

Pure White (SW 7005) is a soft, almost neutral white with a very faint warm lean. Sherwin-Williams lists it at hex #EDECE6 with an LRV of 84, so it's bright without the glare of a stark white. It works on walls, trim, doors and cabinets alike, which is why so many people use it as the one white for the whole house.

Codes, hex values and LRV come from the manufacturers' color data in Muro. A hex value is only an approximation on your screen, and a sample on your own wall always has the final say.

What color is Pure White?

Brand Color Code Hex LRV
Sherwin-Williams Pure White SW 7005 #EDECE6 83.7

The LRV in the table is computed in Muro from the hex. Sherwin-Williams gives 83.957 on its color page for SW 7005, which rounds to 84. The same page marks it for interior and exterior use.

Despite the name, Pure White is not a pure, untinted white. A paper-white hex would be #FFFFFF. Pure White has a little gray in it, enough to take the edge off, and that softness is the reason it's popular. On a big wall a very bright white can look harsh.

What undertone does Pure White have?

Pure White leans very slightly warm. In the hex, red is 237, green 236 and blue 230. Blue is the lowest of the three, which tips it toward yellow, but the gap is only 7 points. In most rooms your eye reads it as plain white, not cream.

You'll sometimes see Pure White described as a cool white. The numbers don't back that up. What does happen is that in cool north light, or in a dim hallway, the gray in it shows more, and it can look a little flat or grayish. It doesn't turn blue. If you want the background, our guide to white paint undertones explains how to spot them on a chip.

The easiest way to see Pure White's temperature is next to its neighbors:

Brand Color Code Hex LRV
Sherwin-Williams High Reflective White SW 7757 #F7F7F1 92.6
Sherwin-Williams Extra White SW 7006 #EEEFEA 85.9
Sherwin-Williams Pure White SW 7005 #EDECE6 83.7
Sherwin-Williams Snowbound SW 7004 #EDEAE5 82.5
Sherwin-Williams Alabaster SW 7008 #EDEAE0 82.2
Sherwin-Williams Greek Villa SW 7551 #F0ECE2 84

LRV in this table is computed in Muro from each hex.

Extra White has green higher than red, so it sits a touch cooler and crisper. Snowbound has a little less green, so it leans faintly pink. Alabaster and Greek Villa drop the blue further and read as soft warm whites, close to cream under warm bulbs. Pure White is the one in the middle, which is why it's hard to get badly wrong. If you're still choosing between whites in general, start with best white paint colors. For the warmer side, see Alabaster vs White Dove vs Chantilly Lace.

What does LRV 84 mean in a real room?

LRV runs from 0 (black) to 100 (a perfect white). At 84, Pure White bounces back most of the light that reaches it. That's high, but it isn't the top of the scale. High Reflective White sits above 92.

That gap matters in two places. On walls in a sunny room, a white in the low-to-mid 80s looks bright but doesn't glare at you at noon. On a ceiling in a dark room, you might want the extra few points from a brighter white. More on what the number does in how LRV affects your paint choice.

How does Pure White look on walls?

South- and west-facing rooms. This is where it looks best. Strong warm light keeps it clean and bright, and it doesn't go yellow the way a creamier white can in late afternoon sun.

North-facing rooms. It works, but expect it to look softer and a bit grayer than on the chip. If that bothers you, go one step warmer to Alabaster rather than brighter to Extra White. A cooler white in north light tends to look colder, not cleaner. There's a full list in paint colors for north-facing rooms.

Open plans and whole-house white. Pure White is a good choice when one color has to cover rooms with very different light. It doesn't swing much between them.

With wood. Next to oak floors or warm wood cabinets it holds up as white. Next to very orange wood, a slightly warmer white like Alabaster can look more relaxed, because the contrast is gentler.

Is Pure White a good trim color?

Yes, and it's one of the most common trim whites for a reason. Because it's soft, it doesn't make the wall color next to it look dirty, which a very bright white can do to beiges and greiges.

You can also run Pure White on walls and trim in the same color and change only the sheen: flat or matte on the walls, satin or semi-gloss on doors and baseboards. The trim then shows up through the shine, not through a color jump. Sheens and the "match or contrast" question are covered in our trim paint color guide.

With colored walls, Pure White works as trim next to most mid tones and darks:

Brand Color Code Hex LRV
Sherwin-Williams Agreeable Gray SW 7029 #D1CBC1 60.1
Sherwin-Williams Repose Gray SW 7015 #CCC9C0 58.4
Sherwin-Williams Sea Salt SW 6204 #CDD2CA 63.3
Sherwin-Williams Urbane Bronze SW 7048 #54504A 8.1
Sherwin-Williams Naval SW 6244 #2F3D4C 4.5

LRV computed in Muro from each hex.

Next to light greiges like Agreeable Gray, the difference is about 24 LRV points, so the trim reads clearly but quietly. Against Naval or Urbane Bronze the contrast is strong, and Pure White's softness helps: a stark white next to navy can buzz, Pure White just looks crisp.

Kitchen cabinets work the same way, and with a darker island it pairs easily with Naval or Urbane Bronze.

Can you use Pure White outside?

Sherwin-Williams lists it for exterior use too. Outside, sunlight is much stronger than indoors, so whites look brighter than on the chip, and Pure White's gray helps keep a white house from glaring. With black window frames it's a safe default. The pairings are in white house with black trim.

What is Pure White in other brands?

If your store doesn't carry Sherwin-Williams, these are the closest matches in Muro's data:

Brand Color Code Hex ΔE
PPG Paints Commercial White 1025-1 #EDECE6 0.00
Dunn-Edwards Frostbite DE6274 #ECEBE5 0.21
Valspar Snowed In 6004-1A #EBEAE4 0.43
Behr Gallery White PPU12-12 #EAEAE6 1.07
Benjamin Moore Alabaster 876 #F2EFE8 1.21

ΔE is the color difference. Under 1, most people can't tell two colors apart on a wall. Between 1 and 2, you might see it side by side, but not across a room.

PPG Commercial White has the same hex, so it's the closest match. Note that Benjamin Moore Alabaster 876 is a different color from Sherwin-Williams Alabaster SW 7008. Same name, different makers. Order by code, not by name.

What to avoid with Pure White

  • Expecting a bright, gallery white. If you want walls that look like printer paper, Pure White will look a little soft to you. Look at Extra White or High Reflective White instead.
  • Pairing it with a stark white on the ceiling in the same room. Next to a much brighter white, Pure White can look dingy. Use the same white, or one softer.
  • Judging it from a tiny chip on a colored wall. The old color around it changes how you see it. Paint a sample board and hold it against white paper and against your trim.

How to check a color before you buy

Paint two sample boards, at least a foot across, and move them around the room in the morning, at midday and under your own bulbs at night. Hold printer paper next to them: whites only show their undertone next to something.

You can also narrow the list down first in Muro. Take a photo of your own room, pick a real paint by name or code, for example Pure White SW 7005 or one of its twins above, and see it on your walls. The iPhone app shows the room by day, at sunset and at night, with lamps on or off, which is where whites differ most. You can also start in the browser at app.usemuro.com. When the color is settled, the paint calculator tells you how much to buy.

FAQ

Is Sherwin-Williams Pure White warm or cool?

Very slightly warm. Its hex is #EDECE6, with blue the lowest of the three channels, but the gap is tiny, so it reads as a near-neutral white. In north light it can look a little gray, not blue.

What is the LRV of Pure White SW 7005?

Sherwin-Williams lists 83.957 on its color page, usually rounded to 84. That's bright, but below the brightest whites such as High Reflective White SW 7757.

Is Pure White good for trim?

Yes. It's soft enough not to make beige, greige or gray walls look dirty, and it gives a clean line against dark colors like Naval SW 6244. Use satin or semi-gloss on trim.

Pure White or Alabaster?

Pure White if you want a white that reads as white in most light. Alabaster SW 7008 if you want it softer and warmer, especially in north-facing rooms or with lots of warm wood.

Pure White or Extra White?

Extra White SW 7006 is a touch brighter and cooler. It suits modern rooms, gray tile and black hardware. Pure White is easier on the eye on large walls.

What is Pure White in Benjamin Moore?

The closest Benjamin Moore color in Muro's data is Alabaster 876, ΔE 1.21. The closest match across all US brands is PPG Commercial White 1025-1, with the same hex.

MS

By Mariusz Szyma

Founder of Muro

I build Muro, the app that shows real paint colors on a photo of your own room. Before that I spent twelve years in product management, at startups and at larger companies.

Share this article

Related Articles