12 Best White Paint Colors and When Each One Works

The same bright living room twice: a warm creamy white wall on the left and a crisp clean white wall on the right

The best white paint depends on your light and on what sits next to it. For crisp trim and ceilings, pick a clean white like Benjamin Moore Chantilly Lace (2121-70). For a whole house, a neutral white like Sherwin-Williams Pure White (SW 7005) is the safest bet, and for north-facing rooms or wood-heavy interiors, choose a warm white like Sherwin-Williams Alabaster (SW 7008) or Benjamin Moore Swiss Coffee (OC-45).

Below are 12 whites in four groups, each with the job it does best. Names, codes, hex values and LRV come from the manufacturers' color data in Muro. The LRV here is calculated from the hex value, not the figure the manufacturer prints on the chip. A hex value is only an approximation on your screen, so a sample on your own wall always has the final say.

How do you pick a white without testing twenty of them?

Two questions narrow it down fast.

1. How bright should it be? LRV (light reflectance value) tells you how much light a color bounces back, from 0 for black to 100 for a perfect white. All twelve colors below sit between about 82 and 94. The higher numbers look clean and bright. The lower ones look softer, and in dim light they can pass for a very pale greige. More in how LRV affects your paint choice.

2. Which way should it lean? Every white has a little color in it. Some lean yellow or cream (warm), some lean gray, green or blue (cool), and a few sit almost in the middle. Hold a sheet of printer paper next to the chip: if the white looks yellow beside the paper it's warm, and if it looks gray or bluish it's cool. We go deeper on undertones in white paint undertones explained.

Then match the lean to the room. A north-facing room with cool daylight wants a warm white, because a cool one goes gray and flat there. In a south- or west-facing room, stick with neutral or slightly cool whites; a very creamy white can turn yellow in strong afternoon sun. Lots of wood, brass, beige or terracotta calls for a warm or creamy white, and black, gray, chrome, marble or blue for a clean or cool one.

1. Crisp, bright whites: trim, ceilings, modern rooms

These are the whites closest to "nothing added". They make trim and doors look sharp and keep a modern room light and graphic. With little daylight they can look stark, so use them where there's plenty of light or where you want contrast. They suit trim, doors, ceilings and kitchens with black or gray accents. For doors and trim specifically, see the trim paint color guide.

Brand Color Code Hex LRV (calc.)
Benjamin Moore Chantilly Lace 2121-70 #F4F6F1 91.5
Behr Polar Bear 1875 #F8F9F2 94.1
Sherwin-Williams Extra White SW 7006 #EEEFEA 85.9

Chantilly Lace is a very clean white, so trim painted with it doesn't go yellow next to other colors. Polar Bear is the brightest of the twelve and a good pick for ceilings. Extra White has a slightly lower LRV and leans a hair cool, which works with gray or blue walls. If the white is for a ceiling, what color to paint your ceiling goes deeper.

2. Neutral and soft gray whites: the whole-house whites

If you want one white for walls, trim and ceilings everywhere, start here. None of these pulls strongly yellow or blue, so they hold up in most rooms and most light. They're also a sensible choice for a rental or a house you plan to sell.

Brand Color Code Hex LRV (calc.)
Sherwin-Williams Pure White SW 7005 #EDECE6 83.7
Sherwin-Williams Snowbound SW 7004 #EDEAE5 82.5
Benjamin Moore Decorator's White CC-20 #EBEDEA 84.2

Pure White is the most balanced: a hint warm, never creamy. Snowbound has a trace of warmth and a soft gray edge, so it doesn't look stark in bright rooms. Decorator's White leans slightly cool and gray. It looks fresh next to marble, gray tile and blue, but it can feel chilly in a north-facing room.

3. Warm whites: living rooms and north light

Warm whites have a little yellow or beige in them. They look soft, and they keep a room with cool northern light from going gray. They do well in living rooms and bedrooms, especially with oak floors. If you are unsure between warm and cool, the comparison in warm white vs cool white paint goes through it room by room.

Brand Color Code Hex LRV (calc.)
Sherwin-Williams Alabaster SW 7008 #EDEAE0 82.2
Sherwin-Williams Greek Villa SW 7551 #F0ECE2 84
Benjamin Moore Simply White 2143-70 #F6F6ED 91.6

Alabaster is the classic soft warm white, creamy but not yet yellow. Greek Villa sits a little lighter and a little warmer. Simply White is the brightest warm white here, so reach for it when you want warmth without losing brightness, say in a kitchen with white cabinets. The three most popular creamy whites are compared in Alabaster vs White Dove vs Chantilly Lace.

4. Creamy whites: traditional homes, wood and brick

These are the softest, most "milky" whites. They look best in traditional or farmhouse rooms, next to natural wood, brick, linen and brass, and they suit old houses with painted paneling. In a south- or west-facing room, check them in the afternoon, since strong sun pushes them toward yellow.

Brand Color Code Hex LRV (calc.)
Benjamin Moore Swiss Coffee OC-45 #EEECE1 83.6
Benjamin Moore Cloud White 967 #F2F1E6 87.5
Farrow & Ball Wimborne White 239 #F7F3E8 89.7

Swiss Coffee is the deepest of the three and the most forgiving on uneven walls. Cloud White is lighter and fresher, and a popular choice for cabinets and trim in warm schemes. Wimborne White is bright but clearly warm.

Which white goes where?

Job Pick Why
Trim and doors with any wall color Chantilly Lace (2121-70) Clean, will not look yellow
Ceilings Polar Bear (1875) Highest LRV of the twelve
One white for the whole house Pure White (SW 7005) Balanced, no strong lean
North-facing living room Alabaster (SW 7008) Warm enough to fight gray light
Gray marble, blue, chrome Decorator's White (CC-20) Slightly cool, stays crisp
Wood, brick, traditional rooms Swiss Coffee (OC-45) Soft and creamy

Sheen matters too. The same white looks brighter in semi-gloss on trim than in matte on a wall, because a glossier surface reflects more light. The paint finish guide covers which sheen goes where.

What to avoid with white paint

  • Mixing two different whites that are almost the same. Put a creamy wall next to a cool trim white and one of them looks dirty. Pick whites from the same family, or make the contrast obvious.
  • A creamy white in a room full of cool gray tile or marble. The cream goes yellow and the stone goes blue.
  • A very bright, cool white in a dark north room. The room doesn't get lighter, it just looks gray.
  • Picking from a tiny chip under store lights. Store lighting has little to do with your living room at 6 pm.

How to check a color before you buy

  1. Put two or three whites side by side, on a large sample board or a patch at least two feet square. A white only shows its lean next to another white.
  2. Look at them in the morning, at midday and in the evening with your own bulbs on. Warm bulbs make every white warmer.
  3. Check them next to your trim, floor and largest piece of furniture, not in the middle of an empty wall.

You can narrow the list in Muro before buying any samples. Take a photo of your room, pick a real paint by name or code, for example from the tables above, and see it on your own walls. In the iPhone app you can see the room by day, at sunset and at night, with the lamps on or off, which is exactly when whites change the most. You can also start in your browser at app.usemuro.com. When you know your white, the paint calculator tells you how much to buy.

FAQ

No manufacturer publishes a ranking across brands. If you want three safe starting points, take Sherwin-Williams Pure White (SW 7005), Sherwin-Williams Alabaster (SW 7008) and Benjamin Moore Chantilly Lace (2121-70). They cover the three main directions: neutral, warm and clean.

What is the best white paint for trim?

A clean white that does not look yellow next to your walls. Benjamin Moore Chantilly Lace (2121-70) and Sherwin-Williams Extra White (SW 7006) are safe choices. If your walls are creamy, use the same white on trim in a glossier sheen instead.

What is the best warm white paint that does not look yellow?

Sherwin-Williams Alabaster (SW 7008) and Benjamin Moore Simply White (2143-70). Both are warm, but Alabaster is soft and Simply White is bright, so neither turns into cream on the wall in most rooms.

Alabaster or Pure White?

Pure White (SW 7005) is more neutral and slightly brighter, LRV 83.7 calculated. Alabaster (SW 7008) is warmer and a little softer, LRV 82.2. Pick Alabaster for north light and lots of wood, Pure White for bright rooms and gray or black accents.

What white paint makes a room look bigger?

A white with a high LRV that matches your light. In a bright room, Benjamin Moore Chantilly Lace (2121-70) or Behr Polar Bear (1875). In a darker room, a warm white like Sherwin-Williams Greek Villa (SW 7551) usually looks lighter in practice than a cool one, because it does not turn gray.

MS

By Mariusz Szyma

Founder of Muro

I build Muro, the app that shows real paint colors on a photo of your own room. Before that I spent twelve years in product management, at startups and at larger companies.

Share this article

Related Articles