Pale Oak (OC-20) Review: Undertone, LRV, Rooms and Twins

The same living room with a white oak floor twice: Pale Oak walls on the left, dark Wrought Iron walls on the right

Pale Oak (OC-20) by Benjamin Moore is a light greige: a soft gray with a little warmth in it and very low color. Benjamin Moore lists its LRV as 68.64, so it stays light in most rooms while still reading as a color next to white trim. It works best as a whole-house neutral in rooms with decent daylight, and in cool or dim light it can lean more gray than beige.

Codes, hex values and LRV come from the manufacturers' color data in Muro, except where we link to Benjamin Moore's own figure. A hex value on your screen is only an approximation. The sample on your own wall decides.

What color is Pale Oak?

Brand Color Code Hex LRV
Benjamin Moore Pale Oak OC-20 #DDD9CE 68.64*

* Manufacturer's value.

The 68.64 is the figure Benjamin Moore gives on its Pale Oak color page. If you calculate it from the hex in Muro you get 69.5, which is close. All the other LRV values in this post are calculated in Muro from the manufacturer's hex.

The OC in the code means it sits in Benjamin Moore's Off-White Collection. Benjamin Moore describes it as a neutral with warm gray undertones that evokes white oak, and that's a fair summary.

What undertone does Pale Oak have?

The hex is red 221, green 217, blue 206. Red and green sit close together and blue is about 11 points lower. So there's a small warm, slightly yellow push, and not much of it. Revere Pewter has a similar balance, only deeper, so if you know that color, Pale Oak behaves like a lighter, quieter version of it.

You'll read online that Pale Oak can look a bit pink or violet. The hex has no red bias that would explain it, so when it happens, look at what's around the wall: cool daylight or a very yellow floor can give a low-color gray a tint.

How it compares with the colors people usually shortlist next to it:

Brand Color Code Hex LRV (calc.)
Benjamin Moore Classic Gray 1548 #E3E0D7 74.5
Benjamin Moore Wind's Breath 981 #DFDBCD 70.8
Benjamin Moore Pale Oak OC-20 #DDD9CE 69.5
Benjamin Moore Balboa Mist 1549 #DAD6CC 67.4
Benjamin Moore Edgecomb Gray HC-173 #D9D3C4 65.3
Benjamin Moore Gray Owl 2137-60 #D3D4CC 65.3
Sherwin-Williams Agreeable Gray SW 7029 #D1CBC1 60.1
Benjamin Moore Revere Pewter HC-172 #CBC6B8 56.5

What does LRV 68.64 mean in your room?

LRV is the share of light a color reflects, from 0 for black to 100 for white. At almost 69, Pale Oak bounces back about two thirds of the light, the light end of greige.

  • A bright room shows the warmth. It reads as soft warm gray with a hint of beige.
  • A dim room pulls it toward plain light gray. It won't go heavy like a color in the 50s, but it loses warmth.
  • White trim in the high 80s or 90s still gives a visible line. The contrast is softer than with Revere Pewter.

Background: how LRV affects your paint choice.

Which rooms suit Pale Oak?

Open floor plans and whole-house color. It's light enough for hallways and dark corners, and has enough color that big walls don't look unfinished.

Living rooms and bedrooms. It sits well with white oak, linen, warm wood and brass. If your furniture is very cool gray or black and chrome, compare it with Gray Owl first.

Kitchens with white cabinets. A crisp white like Chantilly Lace on the cabinets separates clearly from Pale Oak walls. Against cream cabinets the difference gets small, and that can look muddy.

South- and west-facing rooms. Warm afternoon light brings out the beige side without turning it yellow. See paint colors for south-facing rooms.

North-facing rooms. Usable, but expect it to look grayer. If you want warmth there, test Edgecomb Gray next to it. Our north-facing room guide explains why cool light does this.

Which whites go with Pale Oak?

You have more freedom here than with a warmer beige. Clean whites work and so do soft ones. What changes is the contrast.

Brand Color Code Hex LRV (calc.)
Benjamin Moore Chantilly Lace 2121-70 #F4F6F1 91.5
Benjamin Moore Simply White 2143-70 #F6F6ED 91.6
Benjamin Moore Cloud White 967 #F2F1E6 87.5
Benjamin Moore Swiss Coffee OC-45 #EEECE1 83.6

Chantilly Lace is one of the colors Benjamin Moore lists as coordinating with Pale Oak (on that page it carries the code OC-65). It gives the crispest trim line. Simply White has a little more yellow and feels softer. Cloud White and Swiss Coffee are warmer still and sit closer in lightness, so the trim blends in more. That suits a calm bedroom, less so a room where you want the millwork to show. The trim paint color guide goes deeper.

Which dark colors go with Pale Oak?

For an island, lower cabinets, a front door or one strong wall, pick a deep color that's either neutral or clearly colored. Muddy mid-tones tend to make Pale Oak look dull.

Brand Color Code Hex LRV (calc.)
Benjamin Moore Chelsea Gray HC-168 #86847C 23
Benjamin Moore Kendall Charcoal HC-166 #676662 13.3
Benjamin Moore Hale Navy HC-154 #434B56 6.9
Benjamin Moore Wrought Iron 2124-10 #494A4B 6.8
Benjamin Moore Dinner Party AF-300 #763637 6.8

Wrought Iron and Dinner Party are the two deep colors Benjamin Moore puts next to Pale Oak. Wrought Iron is a soft near-black for doors, window frames and islands. Dinner Party is a deep red; try it in a dining room or on a front door. Chelsea Gray and Kendall Charcoal stay in the warm gray family. Hale Navy brings in blue, and navy next to light greige is a safe pairing in kitchens.

Pale Oak twins in other brands

If your store doesn't carry Benjamin Moore, these are the closest colors in Muro's database. ΔE measures the visible difference: under 1 is practically identical, under 2 is very close.

Brand Color Code Hex ΔE
Behr Ginger Sugar MQ3-18 #DBD7CD 0.63
Dunn-Edwards Shady DEC774 #DBD6CB 0.82
PPG Paints Silent Smoke 1025-2 #DBD7CE 1.00
Vista Paint Silver Plume K-934 #DFD9CE 1.01
Sherwin-Williams City Loft SW 7631 #DFDAD1 1.23
Valspar September Fog 6003-1A #DEDACC 1.31

Behr Ginger Sugar is the nearest match overall. City Loft is the closest Sherwin-Williams color and comes out a shade lighter. A twin matches the color, not the paint, so sheen and coverage still vary by product. If you're touching up a wall that's already Pale Oak, stay with Benjamin Moore. More on this in paint color twins across brands.

What to avoid with Pale Oak

  • Cream or ivory trim. It's too close in lightness and temperature. The trim disappears and the walls can look dirty next to it.
  • Expecting beige. If you want a warm, sandy wall, Pale Oak will feel gray. Look at Edgecomb Gray or Wind's Breath.
  • Pairing it with a cool gray in the next room. Next to a blue-leaning gray, Pale Oak looks yellow. Keep connected rooms in one temperature.
  • Choosing from a 2-inch chip. On a full wall it looks lighter and grayer than on the chip.

How to check a color before you buy

  1. Paint two large samples, one on the brightest wall and one in the darkest corner.
  2. Check them in the morning, late afternoon and at night with lamps on. Warm bulbs push Pale Oak toward beige, daylight from the north toward gray.
  3. Put the sample right next to your trim and floor. More tips are in how to test paint colors before committing.

You can also shorten the list before you buy any samples. In Muro you take a photo of your room, pick a real paint by name or code (Pale Oak OC-20 next to Classic Gray 1548, for example) and see it on your own walls. The iPhone app switches between day, sunset and night, with lamps on or off. In a browser, start at app.usemuro.com.

When you've picked the color, the paint calculator tells you how much to buy.

FAQ

Is Pale Oak gray or beige?

It's a light greige that reads more gray than beige. Its hex #DDD9CE has only a little less blue than red and green, so the warmth is subtle.

What is the LRV of Pale Oak?

Benjamin Moore lists Pale Oak OC-20 at LRV 68.64. That's lighter than Agreeable Gray (SW 7029, about 60) and Revere Pewter (HC-172, 55.05 according to Benjamin Moore).

Is Pale Oak lighter than Classic Gray?

No, Classic Gray (1548) is lighter, at about 74.5 calculated from its hex in Muro. Pale Oak has a bit more depth and warmth.

What white trim goes with Pale Oak?

Benjamin Moore suggests Chantilly Lace (2121-70, also listed as OC-65) as a coordinating color. For a softer look, Simply White (2143-70) works. Avoid creamy whites close to Pale Oak in lightness.

What is the Sherwin-Williams equivalent of Pale Oak?

In Muro's database the closest Sherwin-Williams color is City Loft (SW 7631), ΔE 1.23. Behr Ginger Sugar (MQ3-18) is closer still, ΔE 0.63.

Does Pale Oak look pink?

The hex shows no pink bias. If it looks pinkish in your room, the cause is usually the light or a yellow floor next to it. Paint a large sample before deciding.

MS

By Mariusz Szyma

Founder of Muro

I build Muro, the app that shows real paint colors on a photo of your own room. Before that I spent twelve years in product management, at startups and at larger companies.

Share this article

Related Articles